Lamella plug - SRL

Lamella plugs made of PE with strongly curved bottom

Your session has expired, please log in again.
SRL
SRL
SRL
SRL
SRL
SRL
SRL
SRL
SRL
SRL
PDF data sheet
  • Polyethylene (PE)
black RAL 9005
signal white RAL 9003
traffic grey A RAL 7042
  • Lamellar plugs without specification of the pipe wall thickness are generally suitable for pipe wall thicknesses 1.5 - 2 mm. Please indicate the pipe wall thickness when ordering.
  • The ribs are not suitable for sealing against fluids.
  • The plugs are intended for use in pipes or equivalent bores with free passage corresponding to the clear nominal width of at least shaft length.
  • For technical production reasons, a residual sprue may exceed the shaft length.
  • Material and design of shafts guaranteed stop against drop out and easy assembling.
  • For sufficiently smooth installation in pipes with a greater wall thickness, we recommend chamfering the inside diameter of the pipe (approx. 0.3 - 0.5 x 60°).
  • Depending on the selected article, the surface finish can vary between polished and eroded.
  • The ribs are circularly closed or interrupted.
  • The number of slats per plug varies between 2-4 slats.
  • Special colours (colours, minimum quantities, set-up costs, pricing and surcharges)
  • With your engraved company logo (tooling costs, minimum quantities, set-up costs)
  • With your tampon printed company logo (set-up costs, minimum quantities, printing costs)
  • Most plugs can also be made of suitable harder TPE's (TPE= thermoplastic elastomer --> extended range of operating temperature, noise absorbing, non-skid).
  • The stopper is not suitable for use as a glider
  • As a rule, odd outside pipe diameters rounded to 1/10 mm (as part of the article or order number) indicate that these sizes originate from or are common in the Imperial system.

Configure your article. Enter multiple parameters to get the best result.

D in mm:

H in mm:

L in mm:

t in mm:

Your article results:

  • Order-No. D
    mm    		H
    mm    		L
    mm    		t
    mm
  • SRL 10x0,8-1,5
    SRL 10x0,8-1,5 102,5100,8-1,5
  • SRL 12x0,8-2
    SRL 12x0,8-2 122,5100,8-2
  • SRL 14x0,8-2
    SRL 14x0,8-2 14311,50,8-2
  • SRL 15x0,8-2
    SRL 15x0,8-2 15311,50,8-2
  • SRL 16x0,8-2
    SRL 16x0,8-2 16311,50,8-2
  • SRL 18x0,25-1,5
    SRL 18x0,25-1,5 18311,50,25-1,5
  • SRL 18x0,8-2,5
    SRL 18x0,8-2,5 18311,50,8-2,5
  • SRL 19x0,8-2,5
    SRL 19x0,8-2,5 19311,50,8-2,5
  • SRL 20x0,8-2,5
    SRL 20x0,8-2,5 20311,50,8-2,5
  • SRL 21x0,8-2,5
    SRL 21x0,8-2,5 21311,50,8-2,5
  • SRL 22x0,8-3
    SRL 22x0,8-3 22311,50,8-3
  • SRL 22x2-4
    SRL 22x2-4 22311,52-4
  • SRL 23x0,8-3
    SRL 23x0,8-3 23311,50,8-3
  • SRL 25x1-2,5
    SRL 25x1-2,5 25311,51-2,5
  • SRL 25x3-5
    SRL 25x3-5 25311,53-5
  • SRL 26x0,8-3
    SRL 26x0,8-3 26311,50,8-3
  • SRL 27x0,8-3
    SRL 27x0,8-3 27311,50,8-3
  • SRL 28x0,8-2,5
    SRL 28x0,8-2,5 28311,50,8-2,5
  • SRL 30x0,8-2,5
    SRL 30x0,8-2,5 30311,50,8-2,5
  • SRL 30x2,5-4,5
    SRL 30x2,5-4,5 30311,52,5-4,5
  • SRL 32x0,8-3
    SRL 32x0,8-3 32311,50,8-3
  • SRL 32x2,5-5
    SRL 32x2,5-5 32311,52,5-5
  • SRL 34x0,8-3
    SRL 34x0,8-3 34311,50,8-3
  • SRL 34x3,5-4
    SRL 34x3,5-4 34311,53,5-4
  • SRL 35x1-3
    SRL 35x1-3 35311,51-3
  • SRL 35x3-5
    SRL 35x3-5 35311,53-5
  • SRL 36x1-3
    SRL 36x1-3 36311,51-3
  • SRL 37x1-3
    SRL 37x1-3 37311,51-3
  • SRL 38x1-3
    SRL 38x1-3 38311,51-3
  • SRL 38x3-5
    SRL 38x3-5 38311,53-5
  • SRL 40x1-3
    SRL 40x1-3 40311,51-3
  • SRL 40x3-5
    SRL 40x3-5 40311,53-5
  • SRL 42x0,8-2,5
    SRL 42x0,8-2,5 42311,50,8-2,5
  • SRL 42x2,5-5
    SRL 42x2,5-5 42311,52,5-5
  • SRL 45x0,8-3
    SRL 45x0,8-3 45311,50,8-3
  • SRL 45x3-5
    SRL 45x3-5 45311,53-5
  • SRL 48,4x1,2-3,6
    SRL 48,4x1,2-3,6 48,4311,51,2-3,6
  • SRL 48,4x2,5-5,2
    SRL 48,4x2,5-5,2 48,4311,52,5-5,2
  • SRL 50x1-2,5
    SRL 50x1-2,5 50311,51-2,5
  • SRL 50x2,5-4,5
    SRL 50x2,5-4,5 50311,52,5-4,5
  • SRL 50x4,5-6,5
    SRL 50x4,5-6,5 50311,54,5-6,5
  • SRL 55x1-3
    SRL 55x1-3 55314,51-3
  • SRL 55x3-5
    SRL 55x3-5 55314,53-5
  • SRL 57,2x1,2-2,7
    SRL 57,2x1,2-2,7 57,2314,51,2-2,7
  • SRL 60x1-3
    SRL 60x1-3 604181-3
  • SRL 60x3-5
    SRL 60x3-5 603183-5
  • SRL 65x1,5-3,5
    SRL 65x1,5-3,5 654,5211,5-3,5
  • SRL 65x3-5
    SRL 65x3-5 654,5213-5
  • SRL 70 x1-3,5
    SRL 70 x1-3,5 704,5211-3,5
  • SRL 75x1-2,5
    SRL 75x1-2,5 754,5211-2,5
  • SRL 75x3-5
    SRL 75x3-5 754,5213-5
  • SRL 76,2x1,5-3,5
    SRL 76,2x1,5-3,5 76,24,5211,5-3,5
  • SRL 76,2x3,5-6
    SRL 76,2x3,5-6 76,24,5213,5-6
  • SRL 88,9x1,8-3,5
    SRL 88,9x1,8-3,5 88,94,5211,8-4
Loading product information

Login to get price and discount information for all products.


Product variants

You might also be interested in