Plugs, threaded plugs and adjustment plugs
... for sealing pipes and bores of all kinds.
Cover plugs, sight plugs and protective plugs for round tubes
GL
Lamella plugs made of polyethylene for round tubes
GLZ
Covering plugs with flat head made of PE for round inch tubes
SRL
Lamella plugs made of PE with strongly curved bottom
SFL
Lamella plugs made of PE with slightly curved bottom
LBS1
Round covering plugs made of POM for different thicknesses of wall and diameters
LBS2
Round covering plugs made of PA 6 for different thicknesses of wall and central fit
VST
Round covering made of PA for different thicknesses of wall and central fit
HSA
Round covering plugs made of PA 6, not removable
HBS
Round covering plugs made of PA 6, removable and reusable
ITSA
Lamella plugs with ball head made of PE for round tubes
ITSAC
Lamella plugs with ball head made of PE and chrome-/nickel-coloured metal cover for round tubes
DLZ
Covering plugs with ball-head made of polyethylene for round tubes
BS
Covering plugs made of polyethylene for round tubes
BVST
Concrete plugs made of PE with UV stabiliser for round formwork drill holes
CTM
Sight plugs made of PE with chrome-/nickel-coloured metal cover for round tubes
CRM
Sight plugs made of PE with chrome-/nickel-coloured metal cover for round tubes
CM
Steel plugs for round tubes (uncoated)
CGR
Bright chrome plated sight plugs made of ABS for round tubes
CGRM
Matt chrome plated sight plugs made of ABS for round tubes
PSS
Parallel protection plugs made of polyethylene
Viewing plugs and lamella plugs for square tubes
VL/Q
Lamella plugs made of polyethylene for square tubes
VSFL
Lamella plugs made of polyethylene with cover plate 2 mm for square tubes
VLQD
Viewing plugs with lamella made of polyethylene for square tubes
B 44
Sight plugs with lamellas made of polyethylene for square tubes
CQM
Sight plugs made of PE with chrome-/nickel-coloured metal cover for square tubes
CGQ
Sight plugs made of ABS, bright chrome plated for square tubes
CGQM
Sight plugs made of ABS for square tubes, bright chrome plated
Viewing plugs and lamella plugs for rectangular tubes
VL/R
Lamella plugs made of polyethylene for rectangular tubes
VSFL/RE
Lamella plugs made of PE with cover plate 2 mm for rectangular tubes
VLRD
Viewing plugs with lamellas made of polyethylene for rectangular tubes
B 45
Sight plugs made of polyethylene for rectangular tubes
B 46
Sight plugs with lamellas made of polyethylene for rectangular tubes
VLA
Sight plugs with lamellas made of PE for rectangular tubes
CRTM
Sight plugs made of PE with chrome-/nickel-coloured metal cover for rectangular tubes
CRG
Bright chrome plated sight plugs made of ABS for rectangular tubes
CRGM
Matt chrome plated sight plugs made of ABS for rectangular tubes
Viewing plugs and lamella plugs for oval tubes
OVL
Lamella plugs made of PE for flat oval tubes
OVL/GD
Lamella plugs made of PE for flat oval tubes with convex lid
COM
Sight plugs made of PE with chrome-/nickel-coloured metal cover for oval tubes
COC
Bright chrome plated decorative plugs made of ABS for oval tubes
COCM
Matt chrome plated sight plugs made of ABS for oval tubes
OVLN
Lamella plugs made of PE for flat oval tubes with stopper
OVN
Plugs with nose made of PE for oval flat tubes
Threaded plugs
RG
Threaded plugs made of PA for round tubes with injected plastic thread
IRAF
Threaded plugs made of PP for round tubes with injection moulded plastic thread
RGMGK
Threaded plugs made of PA 6 for round tubes, hexagon nuts or screws inserted
RGM
Threaded plugs, two-piece, for round tubes with inserted steel thread
R 40
Threaded plugs made of PA for round tubes with overmoulded steel thread
RGML
Threaded plugs made of PA for round tubes with overmoulded steel thread
RGMM
Threaded plugs made of PA for round tubes with nickel-plated brass thread
RGMS
Threaded plugs made of PA for round tubes with stainless steel thread
VG
Threaded plugs made of PA for square tubes with injected plastic thread
VG/RE
Threaded plugs made of PA for rectangular tubes with injected plastic thread
QAF
Threaded plugs made of PP for square tubes with injection moulded plastic thread
RAF
Threaded plugs made of PP for rectangular tubes with injection moulded plastic thread
VGMGK
Threaded plugs made of PA 6 for square tubes, hexagon nuts or screws can be inserted
VGM
Threaded plugs, two-piece, made of PA for square tubes with an inserted steel thread
CG
Threaded plugs made of PE for square tubes with short overmoulded threaded nut
CGM
Threaded plugs made of PE for square tubes with long overmoulded threaded nut
J
Threaded plugs made of PE for square tubes with overmoulded threaded nut
VGMM
Threaded plugs made of PA-GF for square tubes with nickel-plated brass thread
VGMS
Threaded plugs made of PA-GF for square tubes with stainless steel thread
OG
Threaded plugs made of PA for flat oval tubes with injected high nut
ZN/RU
Threaded plugs of die-cast zinc for round tubes
ZN/Q
Threaded plugs of die-cast zinc for square tubes
ZN/RE
Threaded plugs of die-cast zinc for rectangular tubes
ZN/OV
Threaded plugs of die-cast zinc for oval tubes
Adjustment plugs
RJ
Adjusting plugs made of PA 6 for round tubes with one piece external body and injection moulded thread
RJAF
Adjusting plugs made of PA 6 for round tubes with one piece external body, injection moulded thread and felt slide base
RJG
Adjusting plugs made of PA 6 for round tubes with slip stopper, one piece outer body and injection moulded thread
RJB
Adjusting plugs made of PA 6 with cover for round tubes and with one piece outer body and injection moulded thread
RJGB
Adjusting plugs made of PA 6 with cover for round tubes, slip stopper, one piece outer body and injection moulded thread
RJ SPEZIAL
Heavy duty adjusting plugs made of PA for round tubes with a variety of combinable individual parts
RJLR
Heavy duty adjusting plugs made of ABS for round tubes with round base
RJLS
Heavy duty adjusting plugs made of ABS for round tubes with hexagonal base
RJLM
Heavy duty adjusting plugs made of ABS for round tubes with round base
RJLB
Heavy duty adjusting plugs made of PA-GF for round tubes with inclinable base
RJLF
Heavy duty adjusting plugs made of PA-GF for round tubes with big round base
RJLF2
Heavy duty adjusting plugs made of PA-GF for round tubes with small round base
PSRS
Adjusting plugs for round tubes with inclinable foot
VJ
Adjusting plugs made of PA 6 for square tubes with one piece outer body and injected thread
VJAF
Adjusting plugs made of PA 6 for square tubes with one piece outer body, injection moulded thread and felt slide base
VJG
Adjusting plugs made of PA 6 for square tubes with anti-slip plug, one-piece outer body and injection moulded thread
VJGR
Adjusting plugs made of PA 6 for square tubes with anti-slip plugs, one-piece outer body, one edge R6 and injection-moulded thread
VJR
Adjusting plugs made of PA 6 for square tubes with one piece external body, an edge R6 and injection moulded thread
VJRAF
Adjusting plugs made of PA 6 for square tubes with one piece outer body, an edge R6, injection moulded thread and felt slide base
VJ/RE
Adjusting plugs made of PA 6 for rectangular tubes with one piece outer body and injection moulded thread
VJAF/RE
Adjusting plugs made of PA 6 for rectangular tubes with one piece outer body, injection moulded thread and felt slide base
VJG/RE
Adjusting plugs made of PA for rectangular tubes with anti-slip plug, one-piece outer body and injection-moulded thread
VJK/R
Adjusting plugs made of PA 6 for rectangular tubes with two-piece outer body and injection-moulded thread
VJLQ1
Heavy duty adjusting plugs made of ABS for square tubes with round base
VJLQ2
Heavy duty adjusting plugs made of ABS for square tubes with square base
VJLQ3
Heavy duty adjusting plugs made of PA-GF for square tubes with small round base
VJLQ4
Heavy duty adjusting plugs made of PA-GF for square tubes with big round base
OVJ
Adjustable feet made of PA 6 for flat oval tubes with one piece outer body and injection moulded thread
OVJG
Adjustable feet made of PA 6 for flat oval tubes with slip stopper and one piece outer body and injection moulded thread
OVJAF
Adjustable feet made of PA 6 for flat oval tubes with one piece outer body, injection moulded thread and welded felt