Machine foot - MFAM

Zinced steel machine feet for damping tangential acceleration

Your session has expired, please log in again.
MFAM
MFAM
MFAM
MFAM
MFAM
MFAM
MFAM
MFAM
MFAM
MFAM
PDF data sheet
  • Base body: zinc-plated steel
  • Rubber: NBR 90 Shore
  • The machine foot counteracts the tangential acceleration forces during the working process of machines. These forces cause an imbalance which stresses the clamping / bearing points of the machines.
  • Machine tools, injection moulding units, shearing machines, vibrators, printing machines, etc. ...
  • The load capacity of the screw (buckling length!) may be less than indicated in the table.
  • Put the base with the flange completely screwed under the machine bed.
  • From above screw the threaded stem in the hole of the machine bed.
  • To align the machine, use the three holes in the top flange or the three milled grooves.
  • Holes and grooves are arranged on the circumference at an angle of 120° to each other.

Configure your article. Enter multiple parameters to get the best result.

D in mm:

D1 in mm:

F max. in kg:

F min. in kg:

H max. in mm:

H min. in mm:

L in mm:

M:

WAF in mm:

Your article results:

Loading product information

Login to get price and discount information for all products.


Accessories

You might also be interested in