Articulated glider - GGH 2000

Heavy duty articulated glides made of PA 6 with soft, non-slipping and silencing plastic slide base

Your session has expired, please log in again.
GGH 2000
GGH 2000 extra shank
GGH 2000
LGA test seal
GGH 2000
GGH 2000 extra shank
GGH 2000
LGA test seal
PDF data sheet
  • Base body: Polyamide (PA 6)
  • Slide base: elastic partly vulcanised thermoplast (TPE-V)
black RAL 9005
  • Base from Ø 30 mm qualified for sport floors DIN 18032
  • Suitable for wet rooms and outdoor seating
  • The abrasion of the sliding surface depends on the condition of the floor (surface, soiling of the floor, etc.) and the load on the chair (must be tested by the user, the manufacturer cannot provide any guarantee).
  • The article groups GGx2000 have been tested by the LGA with a displacement test and a tilt/fall test and are randomly tested annually. The tilt and fall test is already a test procedure that goes far beyond the normal or intended use of the chairs. In the event that chairs are pushed with momentum against fixed floor thresholds, we cannot accept any warranty, although moving chairs against floor thresholds is not critical for the intended use by the user. When stacking chairs and for contract seating, ensure that the floor is level and free of cracks and solid floor thresholds.
  • The shafts of the furniture glides are fitted with screw fins to facilitate installation in the tubes (wall thickness 2 mm).
  • Shaft for tube diameter 20 mm is available with screw rib or clamp trips.
  • Further shaft measures starting with 19x1-1,5
  • Further base measures up to appr. 60 mm
  • No materials possible for reinforcement or electrical diverting.
  • e.S. = extra shank
  • Series GGx2000 are patented.
  • Patent 23 312 EP/PCT - DE 199 23 320

Configure your article. Enter multiple parameters to get the best result.

An error occurred! Please contact our support for help.

Reset filter

Your article results:

  • Order-No.

  • Please select more filter properties above to get a selection.